Make your own Monster Can Krusher! Better than the flimsy store bought ones and so easy to use–even for the kids! Mounts to wall studs. Make it from 3/4″ wood and our full size pattern.
Order Krusher Parts Kit #W1370KIT separately
More Info
Dimensions: about 22″ tall
Wood:
one 1X6 x 42″ piece of pine or 3/4″ thick plywood
one 3 1/2″ x 8 3/4″ piece of 3/4″ thick birch plywood or 3/4″ thick hardwood
one 1″ dia. x 5 1/4″ long wood dowel
Hardware: required for assembly
eight #10 x 1 1/2″ long, flat head screws
three 5/16″ dia. x 7 1/2″ long bolts
one 5/16″ dia. x 6″ long bolts
two 5/16″ dia. x 2″ long carriage bolts
four 5/16″ dia. lock nuts
fourteen 5/16″ I.D. washers
Tools:
table saw or circular saw, band saw or hand held sabre saw with a smooth cutting non-chipping blade, coping saw
drill with 7/64″, 3/16″, 5/16″, 3/8″ and 1″ dia. drill bits
hammer
screwdriver
Supplies:
transfer paper, pencil & clear tape
sand paper-medium & fine grits
wood filler-non shrinking, fast drying for wood flaws
paint brush-2″ wide brush
wood glue-exterior
Sealer:
high grade, non-yellowing, semi-gloss UV protected project sealer for indoor protection (#INDRQT)
Reviews
There are no reviews yet.