Special 2 Pattern Set to make our Life-Size 3D Cockatoo and
Life-Size 3D McCaw. Made from layers of 3/4″ and 1 1/2″ wood.
More Info
DESCRIPTION:
A set including our Life-Size 3D Cockatoo (#W1120YD) and our Life-Size 3D Macaw (W1121YD).
DIMENSION:
Cockatoo 16″ long
Macaw approx. 35″ tall (including extended tail) x approx. 11-1/2″ wide
WOOD:
Cockatoo:
One 1X8 x 48″ long board, #2 or better grade pine
Dowel One 1/2″ dia. x 18″ long.
Macaw:
One 1X8 x 72″ long board, #2 or better grade pine
One 2X10 x 16″ long board, #2 or better grade pine
Dowel 3/4″ dia. x 24″ long
TOOLS:
Table Saw
Scroll saw or band saw with a smooth cutting non-chipping blade
Drill, 5/32″ and 1/2″ dia. drill bits
3/8″ dia. round over bit
SUPPLIES:
Transfer Paper (#CARB2)
Pencil and clear tape
Sand paper medium and fine grits
Wood filler non-shrinking, fast drying for wood flaws
Paint brush 2″, 3/4″ and 1/4 wide
Wood glue exterior
PAINT:
White water based primer for a base coat (#PRIMQT) and the following suggested colors of acrylic paint::
2020-Red Iron Oxide
2027-Bright Yellow
2044-Coral
2051-Copen Blue
2057-Quaker Grey
2074-Ocean Blue
2089-Navy Blue
2090-Hippo Grey
2401-Light Ivory
2408-Napthol Crimson
2411-Raw Sienna
2436-Charcoal
2504-Yellow
2505-White
2506-Black
SEALER:
High-grade, non-yellowing, semi-gloss UV protected project sealer for outdoor protection (#POLYQT).
OTHER SUPPLIES:
Plastic Eyes Cockatoo Two 9mm Brown (#PE121).
Macaw Two 12mm Dark Brown (#PE152)
Reviews
There are no reviews yet.