These fun and goofy skeletons are sure to bring a smile to all of your trick-or-treaters this Halloween (26″ tall)
More Info
Dimensions: (3) designs; up to 26″ dia
Wood: One 36″ x 48″ piece of plywood (1/2″ or 3/4″ thick exterior grade, good one or two sides, preferably 5-ply for better stability).
Parts/Hardware:
Plastic Eyes – Six Amber 24mm (6 – #PE136).
Stakes – Six 3/16″ dia. x 11″ long, steel rods (6 – #YS11).
Clamps – Twelve 3/16″ w/screws (1 pack of #YSC1).Tools:
hand held sabre saw with a smooth cutting non-chipping, scrolling blade
screwdriver
Tools:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade
electric drill, drill bit and screwdriver.
Supplies:
Transfer paper (#CARB3), pencil & clear tape.
Sand paper – medium & fine grits.
Wood filler – non shrinking, fast drying for wood flaws.
Paint brushes – 1/4″, 3/4″ and 2″ wide brushes and a fine tipped detail brush.
Paint:
white water base primer for a base coat (#PRIMQT)
2042-Pumpkin
2078-Straw
2401-Light Ivory
2436-Charcoal
2459-Crocus Yellow
2471-Hunter Green
2505-White 2506-Black
Sealer: high-grade, non-yellowing,semi-gloss UV protected project sealer for outdoor protection (#POLYQT)
Reviews
There are no reviews yet.