This comical Dragon Birdhouse climbing up your tree is sure to bring in the compliments!
Clever hinged leg design mounts harmlessly to eight inch diameter or larger trees. Our full-size pattern includes complete instructions. (18″ tall)
Uses one package of our 1″ Brass Hinges (#BHNG1); 1-1/2: Brass Hinges (#BHNG2): 5/16″ ID; 11/16″ Shank Length Eyescrews (#EYE3) and Flush Mount Hanger (#FMH).
More Info
Dimensions: 18″ tall
Wood:
one 1X10 x 96″ long pine board
Tools: Table saw or circular saw and a band saw or scroll saw with a smooth non-chipping blade, Drill and 1/16″, 3/32″, 3/16″ and 1-1/2″ dia. drill bits
Hardware:
Nails – One box, 3D 1-1/4″ long, finish
Hinges – Two 1″ x 1-1/16″ brass plated (#BHNG1)
Four 1-1/2″ x 1-1/2″, brass plated (#BHNG2)
Eyescrew – Two 5/16″ I.D. (#EYE3)
Screw – Three #8 x 1-1/2″ long, flat head
Chain – Double loop steel chain, length depends on diameter of tree.
Flush Mount Hanger (optional) – One 1-3/4″ x 1-1/2″ (#FMH)
Supplies:
Transfer paper (#CARB), pencil & clear tape
Sand Paper – medium & fine grits
Wood Glue – exterior (#GLUETB3)
Wood filler – non-shrinking, fast drying for wood flaws
Paint brushes – 2″, 1″ and fine detail
Paint:
White water base primer (#PRIMQT) for a base coat and the
following suggested colors of Delta Craft paint:
#P2015 – Purple
#P2042 – Pumpkin
#P2057 – Quaker Grey
#P2065 – Apple Green
#P2081 – Fuchsia
#P2484 – Black Cherry
#P2504 – Yellow
#P2505 – White
#P2506 – Black
Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection
Reviews
There are no reviews yet.