Bigfoot Adirondack Chair Pattern

Bigfoot has been spotted…sitting in your yard!

Our newest comfy chair will be a fun conversation piece.

Sturdy chair project features a comfortable contoured seat and can be made from standard lumber and our woodworking plan. Plan includes full-size patterns, assembly diagrams, material list and complete instructions. (47″ tall x 32″ wide)

More Info

Dimensions: 47″ tall x 32″ wide

Wood:
One 2X6 x 96″ long Pine board.
One 2X10 x 96″ long Pine board.
One 2X4 x 96″ long Pine board.
Two 1X4 x 96″ long Pine boards.
One 1X8 x 96″ long Pine board.
One 1X10 x 48″ long Pine board.
One 1X10 x 120″ long Pine board.

HARDWARE/PARTS:
Screws – Twelve #8 x 2-1/2″ long, outdoor.
Carriage Bolts – Six 1/4″ dia. x 3″ long, outdoor.
Washers – Six 1/4″ I.D., outdoor.
Nuts – Six 1/4″, outdoor.
Nails – One box, 4d 1-1/2″ long finish, galvanized.
Plastic Eyes – Two 30mm Clear (#PE147).

TOOLS:
Hand held jigsaw (sabre saw) with a smooth cutting non-chipping scrolling blade,
table saw, router and round over bit, drill and 3/16″, 1/4″ and 3/4″ dia. bits,
screwdriver and 7/16″ socket wrench. )

SUPPLIES:
Transfer paper (#CARB2), pencil, clear tape & scissors.
Sand paper – medium & fine grits.
Wood filler – non shrinking, fast drying for wood flaws.
Wood Glue – Outdoor (#GLUETB3).
Paint brush – 2″ wide brush.

STAIN (optional):
Outdoor Stain, dark brown.

SEALER:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.