NEW! Over 14 feet long! This feeding deer (shown in background) is the perfect complement to our original GINORMOUS White Reindeer (#W1448CY shown in foreground).
Like our first GINORMAS Deer, this project is gargantuan but not difficult to make. It requires 6 sheets of 3/4″ thick plywood and can be cut out using a hand held jigsaw. After painting, most pieces just slide together (then come apart for convenient flat storage).
You must also order or already own GINORMAS Deer Pattern (#W1448CY) to use this pattern. This is a full-size pattern for only the head/neck piece of the head-down Deer. All other pieces are exactly the same as and must be traced from pattern #W1448CY.
More Info
Wood: six sheets of 4′ x 8′ x 3/4″ thick exterior grade plywood, preferably 5-ply for better stability
Hardware:
five 3/8″ dia. x 2″ long carriage bolts
five 3/8″ nuts
five 3/8″ I.D., flat washers
(Available in W1448KIT)
Tools:
hand held sabre saw with a smooth cutting non-chipping, scrolling blade
screwdriver
drill and a 3/8″ dia. drill bit
Supplies:
transfer paper (#CARB2), pencil & clear tape
sand paper-medium & fine grits
wood glue-exterior
wood filler-non shrinking, fast drying for wood flaws
paint brush and roller
Paint:
primer-white water base (#PRIMQT)
white exterior latex enamel
Reviews
There are no reviews yet.